The Inverto IDLP-SNL410-PREMU-OPN single PLL LNB is suitable for receiving the signal from one satellite position and distributing this signal to 1 DVB-S2 satellite tuner (in a TV or satellite receiver). Due to the special design of the LNB, interference from 4G/LTE signals has little or no effect on the signal. Furthermore, the IDLP-SNL410-PREMU-OPN series has a particularly low noise figure and low power consumption.

Unlike conventional LNBs, the IDLP-SNL410-PREMU-OPN is a single PLL (='phase-locked loop') LNB.

The IDLP-SNL410-PREMU-OPN LNB is suitable for both HD and UHD reception.

Key features Inverto IDLP-SNL410-PREMU-OPN single PLL LNB (40 mm)

• DVB-S2 (HD and UHD)
• Low phase noise and low noise figure
• Low power consumption
• High cross polarization isolation
• High frequency stability

Technical specifications Inverto IDLP-SNL410-PREMU-OPN single PLL LNB (40 mm)

• Frequency range
  • Input: 10.7 GHz ~ 12.75 GHz
  • Output: 950 MHz ~ 2150 MHz
• Frequency low band LO: 9.75 GHz
• Frequency high band LO: 10.6 GHz
• Noise figure: aver 0.2 dB (max 0.7 dB)
• LO frequency accuracy @ 25° C: max. ±500 kHz
• LO temperature drift: max. ±1.0 MHz
• LO phase noise @ 10 kHz: max. -80 dBc/Hz
• Conversion gain: min. 56 dB
• Gain ripple (over 26 MHz bandwidth): ±0.6 dB
• Gain variation (over entire band): ±3 dB
• Image rejection: min. 40 dB
• 3rd order intermodulation - ICP3: min. 10 dBm
• 1 dB compression point (@ output): min. 0 dBm
• Cross-polarization isolation: min. 22 dB
• Control signal
  • Ca (V): 11.0 V ~ 14.0 V
  • Cb (H): 16.0 V ~ 20.0 V
  • Cc (band switching): 22 kHz (±4), 0.4 V ~ 0.8 V pp
• Output VSWR: 2.5:1
• In band spurious level: max -60 dBm
• Current consumption: 80 mA max. @ 11 VDC ~ 20 VDC
• In operating temperature: -35 °C ~ +60 °C
• Output impedance: 75 Ω
• Output connector type: F-type ('female')
• Antenna F/D ratio: 0.6
• Weight: 136 g
• Package dimensions (W x D x H): 13.1 x 8.1 x 7.6 cm
• Total package weight: 0.182 kg