The Inverto IDLP-QTL410-PREMU-OPN Quattro PLL LNB is suitable for receiving the signal from one satellite position and distributing this signal to one or more multiswitches. This LNB can NOT be connected directly to a TV or satellite receiver! One or more TVs or satellite receivers can then be connected from the multiswitch. This makes the Quattro LNB very suitable for so-called GSO-installations (= Common Satellite Reception Installations).

Due to the special design of the LNB, interference from 4G/LTE signals has little or no influence on the signal. Furthermore, the IDLP-QTL410-PREMU-OPN series has a particularly low noise figure and low power consumption.

Unlike conventional LNBs, the IDLP-QTL410-PREMU-OPN is a Quattro PLL (='phase-locked loop') LNB.

The IDLP-QDL410-PREMU-OPN LNB is suitable for both HD and UHD reception.

Key features Inverto IDLP-QTL410-PREMU-OPN quattro PLL LNB (40 mm)

• DVB-S2 (HD and UHD)
• Low phase noise and low noise figure
• Low power consumption
• High cross polarization isolation
• High frequency stability

Technical specifications Inverto IDLP-QTL410-PREMU-OPN quattro PLL LNB (40 mm)

• Frequency range
  • Input: 10.7 GHz ~ 12.75 GHz
  • Output: 950 MHz ~ 2150 MHz
• Frequency low band LO: 9.75 GHz
• Frequency high band LO: 10.6 GHz
• Noise figure: aver 0.2 dB (max 0.7 dB)
• LO frequency accuracy @ 25° C: max. ±500 kHz
• LO temperature drift: max. ±1.0 MHz
• LO phase noise @ 10 kHz: max. -80 dBc/Hz
• Conversion gain: min. 55 dB
• Gain ripple (over 26 MHz bandwidth): ±0.6 dB
• Gain variation (over full band): ±3 dB
• Image rejection: min. 40 dB
• 3rd order intermodulation - ICP3: min. 10 dBm
• 1 dB compression point (@ output): min. 0 dBm
• Cross-polarization isolation: min. 22 dB
• Control signal
  • Ca (V): 11.0 V ~ 14.0 V
  • Cb (H): 16.0 V ~ 20.0 V
  • Cc (band switching): 22 kHz (±4), 0.4 V ~ 0.8 V pp
• Output VSWR: 2.5:1
• In band spurious level: max -60 dBm
• Current consumption: max. 120 mA @ 11 VDC ~ 20 VDC
• Operating temperature: -35 °C ~ +60 °C
• Output impedance: 75 Ω
• Output connector type: F-type ('female')
• Antenna F/D ratio: 0.6
• Weight: 224 g
• Package dimensions (W x D x H): 15.5 x 9.1 x 7.6 cm
• Total package weight: 0.284 kg